SpeedyBee Nano 2.4G ExpressLRS ELRS 受信機 FPV フリースタイル 長距離ドローン DIY パーツ用
Pontaパス特典
サンキュー配送
4,998円(税込)
0ポイント(1%)
商品説明

Specifications
Model | SpeedyBee Nano 2.4GHz RX |
Name | ExpressLRS Receiver |
Frequency | 2.4Ghz |
Antenna | T-antenna (54*78mm, 0.6g) |
Chip | SX1280+ESP8285 |
Power | 100mW |
Input voltage | 5V |
Antenna connector | IPEX1 |
Weight | 0.7 gram(without antenna) |
Dimension | 10.4mm*18.4mm |
Default Firmware | SpeedyBee Nano 2.4GHz RX 3.3.1 |
Light indicator
Double red blinking | binding |
Slow red blinking | powering up but unlinked, no packages received from the transmitter |
Solid red | receiver is connected, with signal received |
Fast red flashing | Wi-Fi is turned on, and updating via Wi-Fi is available |
PS.
To turn on Wi-Fi, wait for 60 seconds after powering on or long press button for 3 seconds |
Quick to cut off the power 3 times, it enters the binding mode |


SpecificationsModelSpeedyBee Nano 2.4GHz RXNameExpressLRS ReceiverFrequency2.4GhzAntennaT-antenna (54*78mm, 0.6g)ChipSX1280+ESP8285Power100mWInput voltage5VAntenna connectorIPEX1Weight0.7 gram(without antenna)Dimension10.4mm*18.4mmDefault FirmwareSpeedyBee Nano 2.4GHz RX 3.3.1Light indicatorDouble red blinkingbindingSlow red blinkingpowering up but unlinked, no packages received from the transmitterSolid redreceiver is connected, with signal receivedFast red flashingWi-Fi is turned on, and updating via Wi-Fi is availablePS.To turn on Wi-Fi, wait for 60 seconds after powering on or long press button for 3 secondsQuick to cut off the power 3 times, it enters the binding mode
レビュー
商品の評価:



-点(0件)









